Product – CÔNG TY CỔ PHẦN ĐIỆN T.H.T VIỆT NAM

GUCBIR GENERATOR

vina_admin — Wed, 25 Jun 2025 08:48:47 +0000

MEDIUM AND LOW VOLTAGE MOTORS

vina_admin — Wed, 25 Jun 2025 08:46:46 +0000

Orgatech water treatment chemicals

vina_admin — Tue, 27 May 2025 04:08:28 +0000

Details at: http://www.orgatech.com.vn/

NEXANS CABLE HEAD

vina_admin — Tue, 29 Apr 2025 07:44:42 +0000

Details at:

https://www.nexans.be/en/business/Building-Territories/Power-Accessories.html

3M™ Elbow Single Cable End Set of 3, 93-EE-800L-24-250-ELB-3x1Cx120

vina_admin — Tue, 29 Apr 2025 07:40:58 +0000

Separable Connectors provide a simple and safe connection solution for medium voltage underground cables up to 24 kV.
There are Straight, Elbow or T-plug types.
Wide range of applications for cable cross-sections – from 25 mm2 up to 630 mm2
Cable termination kit includes all materials for complete single 3 phase installation

The Separable Connectors are plug-in, easy-to-install connectors designed for indoor or outdoor use on polymer insulated cables up to 24 kV with copper wire or copper tape shielding, armored or unarmored. Separable Connectors are used to establish connections between cables and switchgear, transformers and other equipment.

3M™ Elbow Single Cable Set of 3, 93-EE-800L-24-250-EL-3x1Cx70..95 CU-AL EXP

vina_admin — Tue, 29 Apr 2025 07:40:26 +0000

Separable Connectors provide a simple and safe connection solution for medium voltage underground cables up to 24 kV.
There are Straight, Elbow or T-plug types.
Wide range of applications for cable cross-sections – from 25 mm2 up to 630 mm2
Cable termination kit includes all materials for complete single 3 phase installation

The Separable Connectors are plug-in, easy-to-install, designed for indoor or outdoor use on polymer insulated cables up to 24 kV with copper wire or copper tape shielding, armored or unarmored. The Separable Connectors are used to establish connections between cables and switchgear, transformers and other equipment.

3M™ Direct Link Box, 110KV Direct Link Box, 1 Kit/Carton

vina_admin — Tue, 29 Apr 2025 07:34:37 +0000

Tin coated busbars provide excellent corrosion resistance
Various SVL types support different systems: (rated voltage / discharge voltage) 3/7 or 3/8 or 4/9.5 kV
Supports single core cable connection with cross section from 1×60+60 to 1×400+400 mm2
Full sample testing IP 68, DC withstand voltage, impulse voltage for enclosure and for SVL

3M™ Protected Grounding Boxes provide SVL-protected grounding for high voltage underground cable sheathing systems. The junction box enclosure is made of SS 304 stainless steel with IP 68 and can be installed on pole/wall or underground/direct buried and on pedestals.

3M™ Surge Arrester 3-Head Set, 93-EE-900-Surge Arrester 34KV 10KA, 3 Phase/Kit, 1 Kit/Carton

vina_admin — Tue, 29 Apr 2025 07:25:59 +0000

The surge protector is mounted inside the rear 3M Sub Tplug cable end. The surge protector is designed to protect equipment, including transformers, circuit breakers and other equipment from overvoltages caused by lightning or equipment switching.

Product characteristics

Lightning protection with a non-live front due to the entire grounding surface.
Lightning protection is designed with gapless Zinc Oxide Varistors (MOVs).
EPDM rubber insulation molded around the MOV module.
Can be connected vertically, horizontally or diagonally.
No minimum phase spacing required.
100% factory electrically tested.

Rated Voltage Level (Um): 26kV 34kV 51kV
Nominal Discharge Current of Lightning Arrester: 10kA 10kA 10kA
Residual Voltage of Nominal Discharge Current: ≤ 72 kV ≤ 95 kV ≤ 134kV
Maximum Continuous Operating Voltage: 20.8kV 27.2kV 40.8kV
Voltage of DC Current 1mA: ≥ 37 kV ≥ 48 kV ≥ 73kV

3M™ Resin Tape Wrapped Medium Voltage Cable Junction Box, 36KV VN-6B 94-A 630-AL/1

vina_admin — Tue, 29 Apr 2025 07:19:22 +0000

Flexible molds can be created by padded mesh tape for all types of cables
Optimize storage, one junction box can accommodate smaller cable sizes
Recreate each layer of cable functionality with premium 3M™ Scotch® rubber tapes and specialty 3M™ tapes for increased customization and fit across a wide range of conduit types
Hydrophobic polyurethane adhesive with Shore D hardness > 50 increases mechanical protection and resistance to water penetration
Quick and clean installation thanks to the integrated nozzle into the resin bag without the need for special tools, or a resin gun.

The resin-filled medium voltage cable junction box uses premium 3M™ Scotch® rubber insulating and semi-conducting tapes, along with other specialty 3M™ tapes to recreate the functional layers of the medium voltage underground cable and recreates the cable jacket with 3M™ Scotchcast™ 40 premium insulating resin, a high-performance two-part compound designed for general purpose electrical insulation, moisture barrier and mechanical protection.

3M™ Resin Tape Medium Voltage Cable Junction Box VN-6B, 94-A 630-CU-Al/1 CSB

vina_admin — Tue, 29 Apr 2025 07:16:12 +0000

Flexible molds can be created by padded mesh tape for all types of cables
Optimize storage, one junction box can accommodate smaller cable sizes
Recreate each layer of cable functionality with premium 3M™ Scotch® rubber tapes and specialty 3M™ tapes for increased customization and fit across a wide range of conduit types
Hydrophobic polyurethane adhesive with Shore D hardness > 50 increases mechanical protection and resistance to water penetration
Quick and clean installation thanks to the integrated nozzle into the resin bag without the need for special tools, or a resin gun.