3M cable head – CÔNG TY CỔ PHẦN ĐIỆN T.H.T VIỆT NAM

3M™ Elbow Single Cable End Set of 3, 93-EE-800L-24-250-ELB-3x1Cx120

vina_admin — Tue, 29 Apr 2025 07:40:58 +0000

Separable Connectors provide a simple and safe connection solution for medium voltage underground cables up to 24 kV.
There are Straight, Elbow or T-plug types.
Wide range of applications for cable cross-sections – from 25 mm2 up to 630 mm2
Cable termination kit includes all materials for complete single 3 phase installation

The Separable Connectors are plug-in, easy-to-install connectors designed for indoor or outdoor use on polymer insulated cables up to 24 kV with copper wire or copper tape shielding, armored or unarmored. Separable Connectors are used to establish connections between cables and switchgear, transformers and other equipment.

3M™ Elbow Single Cable Set of 3, 93-EE-800L-24-250-EL-3x1Cx70..95 CU-AL EXP

vina_admin — Tue, 29 Apr 2025 07:40:26 +0000

Separable Connectors provide a simple and safe connection solution for medium voltage underground cables up to 24 kV.
There are Straight, Elbow or T-plug types.
Wide range of applications for cable cross-sections – from 25 mm2 up to 630 mm2
Cable termination kit includes all materials for complete single 3 phase installation

The Separable Connectors are plug-in, easy-to-install, designed for indoor or outdoor use on polymer insulated cables up to 24 kV with copper wire or copper tape shielding, armored or unarmored. The Separable Connectors are used to establish connections between cables and switchgear, transformers and other equipment.

3M™ Direct Link Box, 110KV Direct Link Box, 1 Kit/Carton

vina_admin — Tue, 29 Apr 2025 07:34:37 +0000

Tin coated busbars provide excellent corrosion resistance
Various SVL types support different systems: (rated voltage / discharge voltage) 3/7 or 3/8 or 4/9.5 kV
Supports single core cable connection with cross section from 1×60+60 to 1×400+400 mm2
Full sample testing IP 68, DC withstand voltage, impulse voltage for enclosure and for SVL

3M™ Protected Grounding Boxes provide SVL-protected grounding for high voltage underground cable sheathing systems. The junction box enclosure is made of SS 304 stainless steel with IP 68 and can be installed on pole/wall or underground/direct buried and on pedestals.

3M™ Surge Arrester 3-Head Set, 93-EE-900-Surge Arrester 34KV 10KA, 3 Phase/Kit, 1 Kit/Carton

vina_admin — Tue, 29 Apr 2025 07:25:59 +0000

The surge protector is mounted inside the rear 3M Sub Tplug cable end. The surge protector is designed to protect equipment, including transformers, circuit breakers and other equipment from overvoltages caused by lightning or equipment switching.

Product characteristics

Lightning protection with a non-live front due to the entire grounding surface.
Lightning protection is designed with gapless Zinc Oxide Varistors (MOVs).
EPDM rubber insulation molded around the MOV module.
Can be connected vertically, horizontally or diagonally.
No minimum phase spacing required.
100% factory electrically tested.

Rated Voltage Level (Um): 26kV 34kV 51kV
Nominal Discharge Current of Lightning Arrester: 10kA 10kA 10kA
Residual Voltage of Nominal Discharge Current: ≤ 72 kV ≤ 95 kV ≤ 134kV
Maximum Continuous Operating Voltage: 20.8kV 27.2kV 40.8kV
Voltage of DC Current 1mA: ≥ 37 kV ≥ 48 kV ≥ 73kV

3M™ Resin Tape Wrapped Medium Voltage Cable Junction Box, 36KV VN-6B 94-A 630-AL/1

vina_admin — Tue, 29 Apr 2025 07:19:22 +0000

Flexible molds can be created by padded mesh tape for all types of cables
Optimize storage, one junction box can accommodate smaller cable sizes
Recreate each layer of cable functionality with premium 3M™ Scotch® rubber tapes and specialty 3M™ tapes for increased customization and fit across a wide range of conduit types
Hydrophobic polyurethane adhesive with Shore D hardness > 50 increases mechanical protection and resistance to water penetration
Quick and clean installation thanks to the integrated nozzle into the resin bag without the need for special tools, or a resin gun.

The resin-filled medium voltage cable junction box uses premium 3M™ Scotch® rubber insulating and semi-conducting tapes, along with other specialty 3M™ tapes to recreate the functional layers of the medium voltage underground cable and recreates the cable jacket with 3M™ Scotchcast™ 40 premium insulating resin, a high-performance two-part compound designed for general purpose electrical insulation, moisture barrier and mechanical protection.

3M™ Resin Tape Medium Voltage Cable Junction Box VN-6B, 94-A 630-CU-Al/1 CSB

vina_admin — Tue, 29 Apr 2025 07:16:12 +0000

Flexible molds can be created by padded mesh tape for all types of cables
Optimize storage, one junction box can accommodate smaller cable sizes
Recreate each layer of cable functionality with premium 3M™ Scotch® rubber tapes and specialty 3M™ tapes for increased customization and fit across a wide range of conduit types
Hydrophobic polyurethane adhesive with Shore D hardness > 50 increases mechanical protection and resistance to water penetration
Quick and clean installation thanks to the integrated nozzle into the resin bag without the need for special tools, or a resin gun.

3M™ QS2000E Cold Shrink Medium Voltage Cable Junction Box, 24KV-93-AS220-3C-150/300 mm2, Heat Shrink Outer Jacket

vina_admin — Tue, 29 Apr 2025 07:13:50 +0000

The flexible design of the pre-molded one-piece cold shrink joint body allows installation on a wide range of cable types and sizes, and is easy to install in temperatures ranging from -20 degrees Celsius to +50 degrees Celsius
No heat or flame required during joint body installation
Wide range of applications covering a number of cable cross-section areas
Underground ground connection using mechanical screen wire connectors

3M™ 92-AS 610 QS2000E Connector Single and three-core cable connectors are designed for inline splicing up to 24 kV, single-core polymer cable systems with copper wire shielding.

3M™ QS200 Medium Voltage Cold Shrink Cable Junction Box, 93-AK 630-1

vina_admin — Tue, 29 Apr 2025 07:09:26 +0000

The flexible design of the pre-molded one-piece cold shrink splice body allows installation on a wide range of cable types and sizes and provides quick and easy installation in temperatures from -20°C to +50°C
The integrated semiconductor electrode forms a faraday cage over the connector and eliminates the use of tape and gap filling
Solderless grounding with copper sleeve and constant tension spring
No heat or flame required during joint body installation

The 3M™ Cold Shrink Medium Voltage Junction Box QS200 Series 93-AK xx0-1 is designed for inline splicing up to 24 kV Umax, for the connection of single core polymer cable systems with copper wire screens according to HD 620 (IEC 60502).

3M™ Elbow Single Cable End Set of 3, 93-EE-800L-24-250-ELB-3x1Cx120

vina_admin — Tue, 29 Apr 2025 07:06:05 +0000

Separable Connectors provide a simple and safe connection solution for medium voltage underground cables up to 24 kV.
There are Straight, Elbow or T-plug types.
Wide range of applications for cable cross-sections – from 25 mm2 up to 630 mm2
Cable termination kit includes all materials for complete single 3 phase installation

3M™ Tplug Single Cable Terminal Set of 3, 94-EE-900-42-1250-Tplug-3x1Cx500 CU-AL, Screw Terminals

vina_admin — Tue, 29 Apr 2025 07:04:20 +0000

Separable cable termination set suitable for a safe and easy installation solution for medium voltage cable terminations for cables up to 42 kV
Tplug cable ends are suitable for bushing connection interface type C 630 A according to EN-50180 & 50181
1-bolt screw tightening terminal for copper or aluminum core cable with cross section 500 – 630 mm2
Full cable terminal kit for complete single 3 phase installation
A pair of soft grip NBR coated gloves and a set of RYB coloured PVC marking tape make installation easy

The Separable Plug-in Cable Termination is easy to install and is designed for indoor or outdoor installation on copper tape or fiber screen polymer insulated cables, unarmored or armored for applications up to 36 kV. This Separable Cable Termination is used to connect cables to circuit breakers, transformers or other equipment fitted with suitable porcelain bushings.